Same Day Processing
Fast Shipping Australia Wide
Andis UltraEdge Clipper Blade #7FC Leaves Hair 3.2mm
A64121
0 Reviews
Description
Andis UltraEdge Clipper Blade #7FC Leaves Hair 3.2mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
Description
Andis UltraEdge Clipper Blade #3 3/4 Leaves Hair 13mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #3 3/4FC Leaves Hair 13mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #4FC Leaves Hair 9.5mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #5FC Leaves Hair 6.3mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. Tge versatile blades fit detachable blade clippers from Andis and other competitior brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, propietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on wether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #7 Leaves Hair 3.2mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #7FC Leaves Hair 3.2mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #10 Leaves Hair 1.5mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #5 Leaves Hair 6.3mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
Description
Andis UltraEdge Clipper Blade #4 Leaves Hair 9.5mm
Andis UltraEdge Clipper Blades are chrome plated, carbon-edged blade sets made for all over grooming. They are designed with ultra sharp steel which will slide through long hair without snagging. The versatile blades fit detachable blade clippers from Andis and other competitor brands such as Wahl and Oster. The steel blades are specially treated and endure a rigorous, proprietary hardening process to extend the edge life and the chrome finish resists rust. The blades are easily able to detach and reattach. Always ensure your blades are well oiled.
Andis Ultraedge clipper blades come in finishing cut (FC) and skip tooth (ST).
- Skip Tooth: The teeth are coarse and uneven which allows the coat to feed into the cutting blade more effectively. This is ideal for pets with rougher, thicker coats and matts in the coat. Often used before a bath to remove the bulk of the coat.
- Finishing Cut: The teeth are all the same length which results in a smoother finish and is ideal for use after the skip tooth blade, after a bath to finish the cut.
Available in different sizes for different coat lengths - refer to size guide below and select the blade according to the length you want to leave the coat. The length will depend on whether you choose to go with or against the grain, as going against the grain will leave the coat one blade size longer.
Andis and Wahl universal attachment combs will fit size 10, 30 and 40.
FITS Andis, Wahl and Oster Clippers with detachable blades:
- Andis: MBG4, AGC-2, AGCB, Excel 5 Speed, Pulse ZRII
- Wahl: KM2, KM10, KM Cordless
- Oster: A5, A6
- and other models
Sizing Guide
Sizes:
- 3 3/4 = 1/2" / 13mm (Skip Tooth) - Long blade for all coats
- 3 3/4FC = 1/2" / 13mm (Finish Cut) - Finer smoother blade
- 4 = 3/8" / 9.5mm (Skip Tooth) - For winter trims on all breeds
- 4FC = 3/8" / 9.5mm (Finish Cut) - Finer Finishing blade
- 5 = 1/4" / 6.3mm (Skip Tooth) - Used for breeds that need more coat left on
- 5FC = 1/4" / 6.3mm (Finish Cut) - a finer finishing blade
- 7 = 1/8" / 3.2mm (Skip Tooth) - For summer trims or short body cuts
- 7FC = 1/8" / 3.2mm (Finish Cut) - a finer finishing blade
- 10 = 1/16" / 1.5mm - medium/ fine length, used mostly for heads, ears, pads, belly and difficult to reach areas.
Reviews
0 Posted Comments |
|
Post a Comment
0 Posted Comments
Post a Comment